Category : Cleaning
If you have a pool in your home, indoor or outdoor, you need to be sure that you’re maintaining it thoroughly. You can always hire someone to do the job for you regularly, but this can be costly over time. Even if you can afford to do this, it would come in handy to know what the job entails, so you can ensure the people you hire take care of everything accordingly. Here are some of the things that need to be done.
Debris and Strainer Baskets
You have to skim the surface often, ideally using a hand or leaf skimmer. This will get rid of insects, leaves, and other debris. This will ensure proper water circulation, and you won’t need as much chlorine as well. Check the strainer baskets, as cleaning these out will also improve circulation and reduce chlorine requirements. Clean out the plastic bags and rinse to remove anything that might be stuck in them.
Clean or Replace Filters
You may have the best swimming pool filter Brisbane has to offer, but it still needs to be cleaned, and eventually replaced. Depending on whether you have a cartridge, sand, or diatomaceous earth type, you will have to follow different cleaning procedures. It will also make the frequency of cleaning vary, so make sure you check what type you’ve got and clean it accordingly. Clean too often and they won’t function as well.
Along with that top notch swimming pool filter Brisbane companies install, there are pumps that handle the purification and circulation processes. Depending on the size of the installation, you’ll need to know how long and how frequently to run the pump. You will have to find out from a professional what is appropriate because this is highly specific to what you have had installed.
Vacuuming and Brushing
You should be vacuuming your pool weekly, and brushing the tiles and walls to prevent buildup of algae and calcium. Vacuuming is essential to remove sediment and dirt that may be on the bottom surface. The tools you should be using will depend on what the walls are made of. In the case of tiles, for example, use a soft brush so that you don’t scratch them. A stiffer brush should be used in the case of concrete or plaster.
Service the Heater
This doesn’t need to be done frequently, but you should check on the specific heater that is installed. Depending on the manufacturer’s specifics, the cleaning instructions will vary. Hence this job should be best done by a professional, unless you’re certain of what you’re doing.
Check the Water Level
Make sure the water level doesn’t drop below the skimmer level when you’re taking care of the debris, or you could end up damaging the pump. When draining all the water to perform maintenance, fill it back up as soon as you can. Don’t drain during winter time.
Chemicals and pH Level
How well do you know your chemistry? You need to know how to test and adjust the water so the chemical components are at the correct levels. The water should have a pH level between 7.4 and 7.6. These are also best left to the professionals, but if you know the requirements, you just need to make sure you’re well equipped with soda ash and muriatic acid. Just make sure you follow instructions meticulously.
The best thing you can do is to hire cleaning professionals, at least for biannual or annual thorough cleaning jobs. As far as possibly, you will be able to do much of the more regular cleaning and maintenance on your own.